+8613826570518        tomtang@xytruss.com
Request a Quote

14x10x8m pyramid roof truss system

This 14x10x8M Roof can be lifted motorized or by manual chain hoists. The Roof is designed and calculated to be set up on single steel bases. The top canopy is tightened with tubes and ratchet straps and the wall canopies can be either in full PVC or the wind through mash.

This 14x10x8M Roof can be lifted motorized or by manual chain hoists. The Roof is designed and calculated to be set up on single steel bases. The top canopy is tightened with tubes and ratchet straps and the wall canopies can be either in full PVC or the wind through mash.


The  Roof consist of a 290x290 Ground Support on four 450x450 Towers and a Roof Structure of 2 Truss a 290x50 Roof Ladder Supports.


The  Roof is a tower based structure with a saddle roof. This saddle roof has a relative high load bearing 450x450 Main Rig with an 290x290 roof structure with a fixed angle on the two 290x290 gables which enables you to re-build the roof in various dimensions.


All the standard sizes 14x10 12x10m, 10x8m, 8x6m and 6x4m are to be build with 450x450/400x400/290x290 of which the 290x290 increases the load bearing capacity of the Roof. As the ground support and additional roof is mainly built out of standard 290x290 elements, only a few special roof parts are required to build a Roof. This makes the roof a very attractive and efficient roof system to acquire.

TECHNICAL SPECIFICATIONS

size: 14x10x8m Tower

truss size:  truss 450x450mm

Main tube: 50x3mm

Roof Structure: SADDLE

PA Wing possible: Yes

Compression: Optional

Max. Load : 6000Kg.

Width: 14 m.

Clearance: 10 m.

Depth:8 m.

untitled.1939.jpg

INQUIRY

Top